Step 2 - Ironman Fitness 6877.1-051116 Owner's Manual

2A. Insert the Vertical Posts (B) into the brackets of Base Beams (A) and
fasten them into place by using:
8 - (7) Hex Head Bolt M12x1.75x80L
16 - (52) Washer D13xD24x2.5
8 - (76) Nylon Lock Nut M12
Note: The two Vertical Posts (B) with the IRONMAN logos on the Flat
End Caps (130) should be installed in the front with the Flat End Caps
(130) facing outwards.
WARNING: Make sure all the posts are well supported during this step,
the structure is not sturdy enough to stand on its own yet.
It is recommended that bolts and screws of the structure NOT be thoroughly
tightened until step 4.
STEP 2
Appearance upon completion of Step 2.
12