55 | Full HD Digital Video Recorder
4.4.4 Health Check
The VMAX A1 offers a true DVR health monitoring, with pop-up messages and e-mail notification on video loss, recording
failure, and storage failure.
To setup:
1.
Check the box next to "Enable Health Check"
2.
Check the box next to the conditions you would like to be notified on.
3.
Set the occurrence intervals.(For Example: when video loss occurs more than 1 time a minute)
4.
Select whether to receive a popup message when conditions are met.
5.
Go to Network Notifications.
6.
Under e-mail notifications, make sure the Health Check option is enabled.
When any condition occurs beyond the set intervals, the system will display a popup alert and send an e-mail notification.