Digital Watchdog DW-VAONE 41T User Manual page 43

43 | Full HD Digital Video Recorder

Preset- Assign apposition for the camera to move to when a sensor is triggered. (This option requires a PTZ camera.
See section 4.2.6 PTZ for more information).

Relay- OFF/ON- enable or disable relay output when a sensor is activated.

Dwell Time- Set the recording period from the start of sensor activation. During this period, the corresponding camera
will record according to the frame and alarm (relay) output set. The recording stops and alarm output is turned off
when the dwell time ends.
N
OTE "Sensor" refers to the alarm connected to the DVR, triggered by a physical sensor input.
N
OTE If the sensor does not operate properly, check the setting of the sensor type (N/O or N/C).
The alarm might not function if the actual connecting sensor type and the sensor type in the system
setting are inconsistent.
N
OTE "Camera pop-up" means that if the DVR Is displaying a multi-channel view, the view will switch to single
channel mode when an alarm is triggered.