Digital Watchdog DW-VAONE 41T User Manual page 46

PTZ Control mode
1) UTC set up
UTC is remotely set to camera OSD menu in the DVR. Select the proper protocol of the connected camera. Check the
'USE PTZ MENU' mode, set the menu and adjust as below.

Menu : Activate the camera OSD menu for setup and adjust

Up/Down arrow : move to categories

Right/Left arrow : Adjust the camera settings

Enter : Select the camera settings or enter the subcategories
2) To use UTC in the Live Mode
Select the single channel which adjust the camera set and change the PTZ Control mode.
Click the right button of mouse and select PTZ menu for activating UTC
click the button, the camera menu display on the full screen. And user move button menu by up/down, left/right
button change the setting. Enter is select menu.
If check the Continuous, The command is entered in quick succession
Control any supported PTZ cameras by moving the mouse pointer.
Focus
Iris
Select the preset number and 'Set' button, 'Move' button is move to setting area
Activate the PTZ menu
Enter
Zoom In/Out
User's Manual | 46