Digital Watchdog DW-VAONE 41T User Manual page 42

4.2.2 Audio
Users can select the audio input and output during live display and match the audio input to a designated channel. (Please
refer to Section 4.3.1 Camera Record).
In addition, users can listen to the audio for both live display and playback mode through the network using Central
Management System (CMS), web browser.
4.2.3 Sensor
Use the sensor setup menu to enable and assign sensor and alarm triggers to corresponding cameras. Select the sensor
type, enable notifications for each sensor, assign relay action and set the dwell time

Type- OFF, N/O (Normal Open) , N/C (Normal Close) The Sensor.

Cam- Select the associated camera for each sensor connected to the DVR.

Notify- Select how to alert when a sensor is activated or motion is triggered. The system can generate a buzzer
sound and/or have a pop-up screen for the camera.
C
AUTION Relay contact can handle up to 24VDC/1A(or 125VAC/0.5A) of other devices. If connected to a circuit
that is over 24VDC/1A(or 125VAC/0.5A), the system may experience problems.
User's Manual | 42