Table of Contents
Advertisement
2-1. Driving procedures
Power switch
Performing the following operations when carrying the electronic
key on your person starts the EV system or changes "POWER"
switch modes.
■
Starting the EV system
STEP
1
Check that the charging cable is disconnected. (P. 73)
STEP
2
Check that the parking brake is set.
STEP
3
Sit in the driver's seat and firmly depress the brake pedal.
The "POWER" switch indicator turns green.
When the shift position is in N, the EV system cannot start.
Push the P position switch when starting the EV system.
STEP
4
200
Press the "POWER" switch.
Continue depressing the brake
pedal until the EV system is
completely started.
The EV system can be started
from any "POWER" switch
mode.
After a few seconds, the
"READY" indicator comes on
with a beep sound.
Advertisement
Table of Contents
