HP StorageWorks XP12000 Site Prep Manual page 80

1.
If shipped in a wooden crate:
a. Using an 11mm (7/16") ratchet or wrench, remove the six lag screws at the
base of the crate.
b. Using the claw end of a claw hammer, remove the crate clamps, and then
remove the crate panels.
WARNING!
Crate clamps are under tension. Wear safety glasses and hold onto
the clamp with your free hand during removal.
2.
Cut and remove the polyester bands.
3.
Remove the nails attaching the carton to the pallet.
4.
Remove the plastic carton fasteners (p-fasteners).
5. Remove the carton.
80
Delivery and unpacking