Weights - HP StorageWorks XP12000 Site Prep Manual

Weights

Use the approximate packaged weights when determining delivery space requirements,
and unpackaged weights to calculate the total weight of your configuration.
The following table provides the approximate weights for:
• Minimum configuration consisting of a base cabinet without additional
components
• Maximum configuration consisting of base cabinet fully populated with
components
Cabinet
DKC
DKU
For each DKC or DKU shipment from the USA to locations outside the USA, add 59 kg
(130 lb) for an international shipping crate. Within the USA, most shipments use a
special carrier process in which frames are shipped without pallets, ramps, and cartons.
In these cases, the packaged weight is the unpackaged weight plus 23 kg (50 lb).
For upgrade DKU packaging (includes a ramp), add 29 kg (65 lb).
The main factor that increases total weight is the number of disk drives. The actual
weight is the base cabinet weight plus the weight of all additional components installed.
The following table provides the approximate weights of additional disk array
components when integrated into a DKC or DKU cabinet.
Product
AE002A #001
AE002A #002
AE002A #003
AE002A #004
AE002A #005
AE002A #006
20 Site requirements
Unpackaged
Packaged
Unpackaged
Packaged
Description
Three-phase 30A/60Hz for XP12000 DKC
Three-phase 30A/50Hz for XP12000 DKC
Single-phase 50A/60Hz for XP12000 DKC
Single-phase 50A/50Hz for XP12000 DKC
Single-phase 30A/60Hz for standard
XP12000 DKC
Single-phase 30A/50Hz for standard
XP12000 DKC
Minimum
configuration
kg lb
590 1300
689 1518
429 945
499 1100
Maximum
configuration
kg lb
875 1930
989 2180
739 1630
853 1880
kg lb
22.6 50
20 44
21.3 47
17.2 38
20
44
18.6 41