Acpi Function; Power Management - Acorp 7KTA2 User Manual

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1

ACPI Function

This item display status of the Advanced Configuration and
Power Management (ACPI).

Power Management

This category allows you to select the type (or degree) of
power saving and is directly related to the following
modes.
1. HDD Power Down.
2. Doze Mode.
3. Suspend Mode.
If you highlight the "Press Enter" next to the "Power
Management" label and then press the enter key, it will
take you to a submenu with the following options:
Power Management
This option allows you to set each mode individually.
When not disabled, each of the ranges are from 1 min. to 1
hr. except for HDD Power Down which ranges from 1 min.
to 15 min. and disable.
The Choices: User Define (default), Min Saving, Max
Saving.
HDD Power Down
By default, this is "Disabled", meaning that no matter the
mode of the rest of the system, the hard drive will remain
ready. Otherwise, you have a range of choices from 1 to
15 minutes or Suspend. This means that you can select to
have your hard disk drive be turned off after a selected
number of minutes or when the rest or the system goes
into a suspend mode.
The Choices: Disabled(default).
Doze Mode/Suspend Mode
The Doze Mode, and Suspend Mode fields set the Period
of time after each of these modes activates. At Max
Saving, these modes activate sequentially (in the given
order) after one minute; at Min Saving after one hour.
The Choices: Disabled(default).
1 - 1 5 1 - 1 5 1 - 1 5 1 - 1 5 1 - 1 5
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp