Acorp 7KTA2 User Manual page 48

Bhapter 1 Bhapter 1
Bhapter 1 Bhapter 1 Bhapter 1
IDE HDD Block Mode
Enabled (default)
Disabled
Onboard FDC Controller
Enabled (default)
Disabled
Onboard Serial Port1/Port2
Select an address and corresponding interrupt for the first
and second serial ports.
The Choices: Auto(default), (3F8/IRQ4), (2F8/IRQ3),
(3E8/IRQ4), (2E8/IRQ3).
UART 2 Mode
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Standard (default), SCR, ASKIR.
IR Function Duplex
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Half (default), Full.
Parallel Port Mode
Normal (default)
EPP
ECP
ECP/EPP
Enabled.
Disabled.
Enabled.
Disabled.
Using Parallel port as Ex-
hancedParallel Port.
Using Parallel port as Ex-
tended Capabilites Port.
Using Parallel port as
ECP/EPP mode.
1 - 1 1 1 - 1 1 1 - 1 1
1 - 1 1 1 - 1 1
BIOS Settp BIOS Settp
BIOS Settp BIOS Settp BIOS Settp