Dram Installation - Acorp 7KTA2 User Manual

Chaosdr 1 Chaosdr 1
Chaosdr 1 Chaosdr 1 Chaosdr 1

1.8 DRAM Installation

1.8.1 DIMM
DRAM Access Time: 3.3V Unbuffered SDRAM/ PC66/
PC100 and PC133 Type required.
DRAM Type: 8MB, 16MB, 32MB, 64MB, 128MB, 256MB,
512MB DIMM Module.(168 pin)
Bank
DIMM 1
( Bank 0-1 )
DIMM 2
( Bank 2-3 )
DIMM 3
( Bank 4-5 )
1.8.2 How to install a DIMM Module
1. The DIMM socket has a "Plastic Safety Tab" and the DIMM
memory module has an asymmetrical notch", so the DIMM
memory module can only fit into the slot in one direction.
2. Push the tabs out. Insert the DIMM memory modules
into the socket at a 90-degree angle then push down
vertically so that it will fit into place.
3. The Mounting Holes and plastic tabs should fit over the
edge and hold the DIMM memory modules in place.
Memory module
16MB,32MB, 64MB, 128MB, 256MB, 512MB
168 pin, 3.3v SDRAM
16MB,32MB, 64MB, 128MB, 256MB, 512MB
168 pin, 3.3vSDRAM
16MB,32MB, 64MB, 128MB, 256MB, 512MB
168 pin, 3.3v SDRAM
Total System Memory(Max 1.536GB)
88 pins
1 - 1 9 1 - 1 9 1 - 1 9
1 - 1 9 1 - 1 9
Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn
Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn Mnshdranarc Cdrbrhoshnn
60 pins 20 pins