Atex Certifications; Warnings - Graco Husky 1050 Repair Parts

Air-operated diaphragm pump
Hide thumbs Also See for Husky 1050:
Table of Contents

Advertisement

ATEX Certifications

 All
1050A
(Aluminum) and
1050C
(Conductive Polypropylene)
pumps are certified:
II 2 GD c IIC T4

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. When
these symbols appear in the body of this manual, refer back to these Warnings. Additional, product-specific warnings
may be found throughout the body of this manual where applicable.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
Use equipment only in well ventilated area.
Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop
cloths (potential static arc).
Keep work area free of debris, including solvent, rags and gasoline.
Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes
are present.
Ground all equipment in the work area. See Grounding instructions.
Use only grounded hoses.
Hold gun firmly to side of grounded pail when triggering into pail.
If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
Keep a working fire extinguisher in the work area.
Static charge may build up on plastic parts during cleaning and could discharge and ignite flammable
materials and gases. To help prevent fire and explosion:
Clean plastic parts in a well ventilated area.
Do not clean with a dry cloth.
Do not operate electrostatic guns in equipment work area.
313435ZAA
1050S
(Stainless Steel) and
(Hastelloy) pumps with aluminum or
conductive polypropylene centers are
certified:
II 2 GD c IIC T4
WARNING
 DataTrak and Pulse Count are
1050H
certified:
0359
9902471
Class I, Div. 1,
Group D T3A
ATEX Certifications
II 1 G
Ex ia IIA T3 Ga
ITS13ATEX27862X
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents