Display Assembly - HP EliteBook x360 1030 G2 Maintenance And Service Manual

Display assembly

Description
13.3-in, UHD, BrightView (3840×2160), UWVA TouchScreen display panel assembly
13.3-in, FHD, BrightView (1920×1080), LED, UWVA TouchScreen display panel assembly
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the display assembly:
1. Disconnect the display infrared camera cable (1) from the system board.
2. Disconnect the WLAN antenna cables (2) from the terminals on the WLAN module.
NOTE:
black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal.
3. Disconnect the WWAN antenna cables (3) from the terminals on the WWAN module (select models only).
NOTE:
WWAN antenna cable connects to the WWAN module #6/Aux terminal.
4. Disconnect the display infrared camera cable (4) from the system board.
52 Chapter 5 Removal and replacement procedures
Bottom cover on page
The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/
The #5/red WWAN antenna cable connects to the WWAN module #5/Main terminal. The #6/blue
27).
Battery on page 29).
Spare part number
917928-001
917927-001