Setting Paper On The Bypass Tray - Ricoh Aficio MP C2050 Operating Instructions Manual

Setting Paper on the Bypass Tray

This section gives instructions for setting paper on the bypass tray.
For details about paper size and paper type, see "Recommended Paper Sizes and Types", About This
Machine.
• Paper sizes that can be loaded onto the bypass tray are 90-305 mm (3.55-12.00 in.) vertical, and
148-600 mm (5.83-23.62 in.) horizontal.
• When paper larger than 600 mm (23.62 in.) in length is used, the paper may become wrinkled, may
not be fed into the machine, or may cause paper jams.
• The machine can automatically detect the following sizes as regular size copy paper:
• A3 , A4
• 11 " 17 "
• If you want to use the size of paper other than the above, be sure to specify the size.
• The following functions are disabled when printing from the bypass tray:
• Duplex/Booklet printing
• Auto Tray Select
• Auto Tray Switching
• Rotating Collate
• Staple (when the optional Internal Finisher is installed)
• Punch (when the optional Internal Finisher and Punch Unit are installed)
• Certain types of OHP transparencies for color printing cannot be used. For details about types that
can be used, contact your sales or service representative.
1. Open the bypass tray.
, A5
1
, 8 / " 11 " , 5
2
BMG011S
1 1
/ " 8 / "
2 2
19