Using The Smartdevicemonitor For Client Port - Ricoh Aficio MP C2050 Operating Instructions Manual

1. Preparing the Machine
8. Click [Finish].
A message about restarting the computer appears. Restart the computer to complete installation.
9. Click [Exit] in the first dialog box of the installer, and then take out the CD-ROM.
1
• To stop installation of the selected software, click [Cancel] before installation is complete.
• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
• Select a machine to whose IP address is displayed in [Connect To] to install SmartDeviceMonitor for
Client when using TCP/IP.
• Quick Install is not available unless bidirectional communication between the machine and computer
is enabled via parallel connection. For details about bidirectional communication between the
machine and computer, see "Making Option Settings for the Printer".
• p.51 "Installing the Printer Driver Using USB"
• p.57 "Making Option Settings for the Printer"

Using the SmartDeviceMonitor for Client Port

• To install SmartDeviceMonitor for Client under Windows 2000/XP/Vista, and Windows Server
2003/2003 R2/2008, you must have an account that has Manage Printers permission. Log on as
an Administrator.
• Install SmartDeviceMonitor for Client before installing the printer driver when using the
SmartDeviceMonitor for Client port.
Installing SmartDeviceMonitor for Client
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
4. Click [DeskTopBinder - SmartDeviceMonitor for Client].
5. The message to quit all other applications appears. Quit all applications, and then click [Next
>].
6. The software license agreement appears in the [License Agreement] dialog box. After
reading through its contents, click [Yes].
36