Table of Contents
Advertisement
5.
Remove the TouchPad (5).
Reverse this procedure to install the TouchPad.
RTC battery
Description
RTC battery (includes cable and double-sided adhesive)
Before removing the RTC battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
46
Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page
29).
27).
Spare part number
909636-001
Advertisement
Table of Contents
