Table of Contents
Advertisement
4
Removal and replacement preliminary
requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screw driver
●
Magnetic screw driver
Phillips P0 screw driver
●
●
Torx5 screw driver
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE:
As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
when handling the plastic parts. Apply pressure only at the points designated in
the maintenance instructions.
22
Chapter 4 Removal and replacement preliminary requirements
Using excessive force during disassembly and reassembly can damage plastic parts. Use care
Advertisement
Table of Contents
