Table of Contents
Advertisement
S
S
UPER
ERVER 5018R-M/5018R-MR User's Manual
Fan Headers
The X10SRi-F has six fan headers (Fan1
~ Fan5 and FanA). These are 4-pin fan
headers and work with IPMI to monitor
and change fan speed as required based
on the system temperature. Refer to the
table on the right for pin definitions.
Chassis Intrusion
A Chassis Intrusion header is located
at JL1 on the motherboard. Attach the
appropriate cable from the chassis to
inform you of a chassis intrusion when
the chassis is opened.
Power LED/Speaker
On the JD1 header, pins 1-3 are used
for power LED indication and pins 4-7
are for the speaker. See the table on
the right for pin definitions. Please note
that the speaker connector pins (4-7) are
used with an external speaker. If you wish
to use the onboard speaker, you should
close pins 6-7 with a jumper.
Internal Buzzer (SP1)
The Internal Buzzer (SP1) can be used
to provide audible indications for various
beep codes. See the table on the right for
pin definitions.
Standby Power
The Standby Power header is located
at JSTBY1 on the motherboard. See the
table on the right for pin definitions.
Pin#
1
2
3
4
Pin#
1
2
Speaker Connector
Pin Setting
Pins 4-7
Pins 6-7
Pin#
Pin 1
Pin 2
Pin#
1
2
3
5-16
Fan Header
Pin Definitions
Definition
Ground (Black)
+12V (Red)
Tachometer
PWM Control
Chassis Intrusion
Pin Definitions
Definition
Intrusion Input
Ground
Pin Settings
Definition
External Speaker
Internal Speaker
Internal Buzzer
Pin Definition
Definitions
Pos. (+)
Beep In
Neg. (-)
Alarm
Speaker
Standby Power
Pin Definitions
Definition
+5V Standby
Ground
No Connection
Advertisement
Table of Contents
