Advertisement
All data
l
New data (data logged since the last download)
l
Time interval to download
l
New data is downloaded by default to a new
log file. To append new data to the last
download of this log, be sure the option
"Append logs on download" is selected in the
General Settings dialog (Preferences >
General Settings).
2. The log is copied to the connected PC into your Win-Situ
working directory folder. View or change the working
directory using File > Settings.
3. At the end of the download, Win-Situ gives you the
option of viewing the data.
Select Yes and the log is displayed in the Data
l
screen.
Select No and the Logging screen appears. You
l
can view the data at any time by selecting it in the
Data tab.
Win-Situ Mobile Software
Use Win-Situ Mobile with a RuggedReader Handheld PC
and Aqua TROLL, Level TROLL, and Rugged TROLL
Instruments. Training videos are available on the In-Situ
Inc. website www.in-situ.com under Tech Resources.
Connect an Instrument to the Rugged Reader
Serial Port
1. Rugged Reader
2. Communication Cable
3. RuggedCable System
4. In-Situ instrument
Connect to the Software
With an instrument connected, tap the Start button on the
RuggedReader. Tap Win-Situ Mobile. Tap the Connect
button, and tap the check mark.
Set up a Data Site
1. Tap the Sites button. Select an existing site or tap the
New button to create a new site.
2. Enter information on the subsequent screens and
continue by tapping the right arrow button. Tap the
check mark button when finished.
Set up a Data Log
1. Tap the View menu and select Logging.
2. Tap the More button, and then tap the New button.
3. Add the log name and tap the right arrow button.
4. Select the parameters you want.
5. Rearrange parameter order if desired. Tap Edit to
change units.
6. Select a logging method appropriate for your
deployment.
7. Configure the logging method.
8. Select a start condition.
When an instrument is deployed on a wire,
rather than a cable, you will not be able to
communicate with it after installation. Select a
Scheduled start if you are deploying the
instrument on a wire.
9. Select log wrap condition.
10. Select a level reference type.
11. Enter a specific gravity value for the deployment.
12. Configure the level reference. Your instrument MUST
be installed in its final location to set the level reference
correctly. If you are setting up a data log before installing
your instrument in its final location, you will need to
select either "Set First Logged Reading To" or "Remind
Me to Set Reference Later".
Select "Set First Logged Reading To" if you are
using a scheduled start, or "Remind Me to Set
Reference Later" if you are using a manual
start and are NOT deploying the instrument on
a wire.
13. The software displays a summary. Look over your
selections carefully before clicking the check mark.
14. Start the log. A Scheduled Start log will start
automatically at its programmed time. To start a Manual
log, go to the Logging tab, highlight the log name, and
tap the Start button.
View or Download the Log
1. To download data, tap the Logging tab, and tap the
Download button. Select the desired download options
and tap the check mark when finished.
2. To view the data, tap the View button. Use the View
drop-down menu to select the data channel you want to
view. Select the date and time interval you want and tap
0091332 | Rev. 006 | 09/2013
Advertisement
