Information List - Siemens SIPROTEC 7SK80 Manual

Functions
2.19 Breaker Control
Operation Using DIGSI
Switchgear can be controlled via the operator control interface with a PC using the DIGSI software. The pro-
cedure to do so is described in the SIPROTEC 4 System Description (Control of Switchgear).
Operation Using the System Interface
Switchgear can be controlled via the serial system interface and a connection to the substation control equip-
ment. For that it is necessary that the required periphery is physically existing in the device as well as in the
substation. Furthermore, certain settings for the serial interface need to be made in the device (see SIPROTEC
4 System Description).

2.19.1.2 Information List

No. Information
- 52Breaker
- 52Breaker
- Disc.Swit.
- Disc.Swit.
- GndSwit.
- GndSwit.
31000 Q0 OpCnt=
31001 Q1 OpCnt=
31008 Q8 OpCnt=
270
Type of In-
formation
CF_D12 52 Breaker
DP 52 Breaker
CF_D2 Disconnect Switch
DP Disconnect Switch
CF_D2 Ground Switch
DP Ground Switch
VI Q0 operationcounter=
VI Q1 operationcounter=
VI Q8 operationcounter=
Comments
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A4, Release date 08.2010