Power System Data 1; Description; Setting Notes - Siemens SIPROTEC 7SK80 Manual

Functions
2.1 General
No. Information
72 Level-2 change
73 Local change
110 Event Lost
113 Flag Lost
125 Chatter ON
140 Error Sum Alarm
160 Alarm Sum Event
177 Fail Battery
178 I/O-Board error
181 Error A/D-conv.
191 Error Offset
193 Alarm NO calibr
194 Error neutralCT
301 Pow.Sys.Flt.
302 Fault Event
303 sens Gnd flt
320 Warn Mem. Data
321 Warn Mem. Para.
322 Warn Mem. Oper.
323 Warn Mem. New
502 Relay Drop Out
510 Relay CLOSE
545 PU Time
546 TRIP Time
10080 Error Ext I/O
10081 Error Ethernet
10082 Error Terminal
10083 Error Basic I/O
2.1.3

Power System Data 1

2.1.3.1 Description

The device requires certain data regarding the network and substation so that it can adapt its functions to this
data depending on the application. This may be, for instance, nominal data of the substation and measuring
transformers, polarity and connection of the measured quantities, breaker properties (where applicable), etc.
There are also certain parameters that are common to all functions, i.e. not associated with a specific protec-
tion, control or monitoring function. The following section discusses this data.

2.1.3.2 Setting Notes

General
Some P.System Data 1 can be entered directly at the device. See section 2.20 for more information regard-
ing this topic.
34
Type of In-
formation
OUT Level-2 change
OUT Local setting change
OUT_Ev Event lost
OUT Flag Lost
OUT Chatter ON
OUT Error with a summary alarm
OUT Alarm Summary Event
OUT Failure: Battery empty
OUT I/O-Board Error
OUT Error: A/D converter
OUT Error: Offset
OUT Alarm: NO calibration data available
OUT Error: Neutral CT different from MLFB
OUT Power System fault
OUT Fault Event
OUT sensitive Ground fault
OUT Warn: Limit of Memory Data exceeded
OUT Warn: Limit of Memory Parameter exceeded
OUT Warn: Limit of Memory Operation exceeded
OUT Warn: Limit of Memory New exceeded
SP Relay Drop Out
SP General CLOSE of relay
VI Time from Pickup to drop out
VI Time from Pickup to TRIP
OUT Error Extension I/O
OUT Error Ethernet
OUT Error Current Terminal
OUT Error Basic I/O
Comments
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A4, Release date 08.2010