LEGRAND LE00282AC User Manual
  1. Manuals
  2. Brands
  3. LEGRAND Manuals
  4. Controller
  5. LE00282AC
  6. User manual
LEGRAND LE00282AC User Manual

LEGRAND LE00282AC User Manual

Touchscreen scenario controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Touchscreen
scenario controller
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LE00282AC and is the answer not in the manual?

Questions and answers

Related Manuals for LEGRAND LE00282AC

Summary of Contents for LEGRAND LE00282AC

  • Page 1 Touchscreen scenario controller User manual...
  • Page 2 Congratulations You have just acquired a Touchscreen Scenario Controller. This device lets you: programme commands control your In One by Legrand products using the touchscreen display customized commands access information This guide is intended to help explain the system so that you can set and use any command you may need.

  • Page 3: Table Of Contents

    Contents I / PRESENTATION OF THE TOUCHSCREEN SCENARIO CONTROLLER ... . 6 II / GLOSSARY AND HELP........... 7 DEFINITIONS OF THE MAIN TERMS USED .
  • Page 4 go back to contents IV / CONTROL FUNCTIONS ..........47 CONTROLLING COMMANDS .
  • Page 5 go back to contents CALIBRATING THE TOUCHSCREEN..........60 BRIGHTNESS.
  • Page 6 Navigation keys video playlists. Reset button Communication port (mini USB), for Legrand technical You are advised to start by setting the device’s support only date and time. Once the controller has been powered up, the homepage opens See Section VI SETTING FUNCTIONS.

  • Page 7: Definitions Of The Main Terms Used

    Specific state that authorises or refuses the actuation that can be read in sequence or randomly by a of a command. There are 2 types of condition: multimedia player. time and In One by Legrand . These are used for scheduled programmes and automations. NAVIGATION KEYS...

  • Page 8: Action Keys

    Numeric keypad / Special types Open the selected week .,éà? Erase Change a time flag Delete Repeat a time flag or a programme repeat Add a condition Confirm Lets you confirm any action. Time or In One by Legrand condition. Delete a condition...

  • Page 9: Control Keys

    View command detail 3.4 - Configuring an automation Update Add a trigger Supervision mode Add a condition Time or In One by Legrand condition. Command mode 3.5 - Configuring a supervisor 4.2 - Shutters Change a supervisor into an alert trigger...
  • Page 10 go back to contents glossary presentation configuration control overview setting multimedia 4.4 - Lighting and dimming 4.7 - Playlists and mediascenes Pause Stop Dimming - Previous Dimming + Next Activate a gradual lighting command Volume + Volume - 4.5 - Heating Mute (change the mode).
  • Page 11 go back to contents glossary presentation configuration control overview setting multimedia 4.8 - Play modes Normal Repeat Loop Shuffle 4.9 - Statuses Error in process Pause in process Play in process Stop in process...

  • Page 12: Managing Areas

    go back to contents III / Configuring the controller Select the Settings tab to access the touchscreen scenario controller configuration panel. My areas 00:00 monday january 1 00:00 House Select an area to modify it Areas Commands Time or press (+) to add an area Automations Supervision Preference...
  • Page 13 go back to contents configuration presentation glossary control overview setting multimedia press the key to erase the current name You can rename an area icon if the name of the selected icon has already been used. allow you to move to upper or lower case mode. Just press the key (see: 1.2 - Modifying an allow you to move to numeric or special type mode.

  • Page 14: Managing Commands

    Select an icon for your area and press (ABC) to rename it. The commands let you control your In One by Legrand products. Press the Commands icon to access the menu. The screen displays the existing commands for each created area.
  • Page 15 The homepage displays the available icon types. My commands 00:00 The command type is determined according to the type of the In One by Legrand products to be controlled: House Arrival - if the products are all of the same kind,...
  • Page 16 House Arrival 254235 press the The key goes green. To initialise the In One by Legrand product recognition procedure, press the LEARN button on each product together with the relevant action Press the socket(s) button (preset). that you wish to activate.
  • Page 17 Press the key to rename the command. To initialise the In One by Legrand product To modify the icon, select it by placing it at the recognition procedure, press the LEARN button centre of the screen (using the keys).
  • Page 18 go back to contents configuration presentation glossary control overview setting multimedia To delete a product from the command, press the My commands 00:00 key (except for heating-type commands). Press the key to rename a product ID. Make the selection using the keys.

  • Page 19: Managing Shortcuts

    go back to contents configuration presentation glossary control overview setting multimedia 2.4 - Deleting a command press the The command icon is displayed with an icon. To delete a command: select the command using the navigation keypad press My commands 00:00 MANAGING SHORTCUTS Arrival...

  • Page 20: Scheduled Programming

    go back to contents configuration presentation glossary control overview setting multimedia 4.1 - Creating a programme and its time flags SCHEDULED To create a programme, you must create at least one time flag. PROGRAMMING Creating a programme Once the commands have been defined, you can configure select the desired week using the navigation keypad scheduled programmes.
  • Page 21 go back to contents configuration presentation glossary control overview setting multimedia Creating a time flag press to access the command selection screen Programmes for 01/01/09 00:00 Add a time flag 00:00 home cinema shutters repeat House 80s Rock wake up Select a command press the key to add a time flag...
  • Page 22 go back to contents configuration presentation glossary control overview setting multimedia If this does not involve a scene: determine the command’s end status by pressing the Week of 01/01/09 00:00 corresponding action button press to confirm The time flag is added to the programme. Select a day using the browser and validate to view the programme Programmes for 01/01/09...
  • Page 23 The displayed screen lets you select the type of condition. The SCHEDULE and In One by Legrand press the conditions applied to a time flag let you postpone A message invites you to confirm the deletion.
  • Page 24 go back to contents configuration presentation glossary control overview setting multimedia Adding a schedule condition Winter condition 00:00 select the SCHEDULE type for the condition press to confirm monday tuesday enter the name of the condition wednesday press to confirm thursday friday Winter condition...
  • Page 25 go back to contents configuration presentation glossary control overview setting multimedia press to confirm Add a condition 00:00 The condition is added. The screen then displays the new condition in the list of existing conditions. press the condition to add it to the time flag Delay Add a condition 00:00...
  • Page 26 Adding an In One by Legrand condition Day condition 00:00 select the In One by Legrand type for the condition Dual switch Output 1 > Status press to confirm Output 2 > Status The virtual keypad is displayed.
  • Page 27 Add a condition 00:00 press In One by Legrand condition is displayed. Delay Add a condition 00:00 Cancel No condition Winter Select the action to be executed: delay using the arrows...
  • Page 28 go back to contents configuration presentation glossary control overview setting multimedia Deleting a condition from a time flag Creating a DAY repetition If you press DAY, you can repeat a programme for a certain select the time flag from which the condition is to be deleted number of days.
  • Page 29 go back to contents configuration presentation glossary control overview setting multimedia Week of 01/01/09 > repeat the time flag(s) 00:00 Week of 01/01/09 > repeat the time flag(s) 00:00 End of repetition: monday tuesday Never wednesday On 01/01/09 thursday After 1 repetition friday saturday sunday...
  • Page 30 go back to contents configuration presentation glossary control overview setting multimedia Creating a MONTH repetition Creating a YEAR repetition If you press MONTH, you can repeat a programme for a certain If you press YEAR, you can repeat a programme for a certain number of days per month.

  • Page 31: Automating Commands

    go back to contents configuration presentation glossary control overview setting multimedia 4.5 - Disable all the programmes Day of 01/01/09 > change the colour 00:00 In the screen displaying the current month, press the key. The calendar is disabled. Press the key to reactivate it.
  • Page 32 go back to contents configuration presentation glossary control overview setting multimedia 5.1 - Creating an automation Wake up automation 00:00 My automations 00:00 home shutters cinema house House 80s Rock wake up Select a command press the icon of the desired command The command’s status is displayed.
  • Page 33 go back to contents configuration presentation glossary control overview setting multimedia This step does not appear for scene-type Add a trigger 00:00 commands. press to confirm Adding a trigger Wake up automation 00:00 Trigger: Condition: None None shutters press The virtual keypad is displayed. enter the name of the trigger press to confirm...
  • Page 34 go back to contents configuration presentation glossary control overview setting multimedia press the product’s LEARN button or press the button and enter the product ID directly Add a trigger 00:00 The product’s characteristics are displayed as soon as it has been identified.

  • Page 35: Managing Supervisors

    Selecting a trigger condition Wake up automation 00:00 The SCHEDULE and In One by Legrand conditions applied to a automation let you trigger the automation according to a specified value. Trigger: Condition: None shutters If you wish to add a condition to an automation, press Next, go to Section 4.2 Adding a condition.
  • Page 36 go back to contents configuration presentation glossary control overview setting multimedia 6.1 - Adding a supervisor monday january 1 00:00 select the area in which the supervisor is to be located using the navigation keys press The screen used to select sensor types is displayed. Areas Commands Time...
  • Page 37 go back to contents configuration presentation glossary control overview setting multimedia select the input variable My supervisors 00:00 press The supervisor’s characteristics are displayed as soon as it has been identified. Press the LPB of the product containing the sensor My supervisors 00:00 enter the product ID...

  • Page 38: Managing Sources

    go back to contents configuration presentation glossary control overview setting multimedia My supervisors 00:00 My supervisors 00:00 RF detector Action 20°C Detector temperature House Delete an alert trigger select the detector select the area in which the alert trigger is located using the select the desired action navigation keys press...

  • Page 39: Managing Players

    go back to contents configuration presentation glossary control overview setting multimedia press the key to force the refresh action Monday january 1 00:00 If a source is no longer available, the name of this source is linked to the icon. icon is also linked to the settings tab.

  • Page 40: Managing Playlist Commands

    go back to contents configuration presentation glossary control overview setting multimedia MANAGING PLAYLIST My media players 00:00 COMMANDS Sony DVD Player Playlist commands are media commands that let you use media players to relay playlists (sound, image, video) selected from a To refresh source.
  • Page 41 go back to contents configuration presentation glossary control overview setting multimedia My playlists commands 00:00 Monday january 1 00:00 Image Sound Video House Select a playlist type 9.1 - Adding a playlist command to an area press a playlist type to select it A virtual keypad is displayed;...
  • Page 42 go back to contents configuration presentation glossary control overview setting multimedia press to confirm Holiday Playlist 00:00 The source selection screen is displayed. Videos summer 2008 Holiday Playlist 00:00 House holidays Dell 722 House holidays Select a directory to build your playlist Select a source select a directory using the navigation keypad (right and left keys)

  • Page 43: Managing Mediascenes

    go back to contents configuration presentation glossary control overview setting multimedia select your desired destination player MANAGING MEDIASCENES If a player is not available, the icon is Mediascenes let you link a scene command to a playlist linked to the Settings tab command.
  • Page 44 go back to contents configuration presentation glossary control overview setting multimedia My mediascenes 00:00 My mediascenes 00:00 mediascene 1 House 10.1 - Adding a mediascene to an area press the key to erase the current name enter the new name To add a mediascene to an area, just: press to confirm...
  • Page 45 go back to contents configuration presentation glossary control overview setting multimedia You can rename the mediascene by pressing the Wake up Mediascene 00:00 key. Scene: Playlist: Wake up None If no scene and/or playlist is available in the area House Wake up selected for the mediascene, the keys are...
  • Page 46 go back to contents configuration presentation glossary control overview setting multimedia select the play mode using the navigation keypad press the to confirm The playlist is now linked to the mediascene. press Wake up Mediascene 00:00 To move a command from one area to another, refer to Section 2.3 - Moving a command from one area to another.

  • Page 47: Controlling Commands

    House 80s Rock wake up Press the key to display the command detail. The status of each In One by Legrand product Select an area and a command making up the command is displayed. monday january 1 00:00 Shutters 1 - up...

  • Page 48: Displaying Supervisor Status

    go back to contents control presentation glossary configuration overview setting multimedia DISPLAYING DISABLING AN ALERT SUPERVISOR STATUS When an alert is detected by an alert trigger, the controller signals it by displaying a message that disables all the tabs. To display the supervisors for an area: select an area monday january 1 00:00...

  • Page 49: Example 1: Creating A 'Leaving' Scene Command

    EXAMPLE 1: CREATING A ‘LEAVING’ SCENE COMMAND Your problem The Legrand solution You are leaving your house for a prolonged period (i.e. a You can create a ‘We’re leaving’ scene command. week-end, holidays, etc.). You want to be able to leave your...

  • Page 50: Example 2: Programming A Heating Command According To Time Constraints

    EXAMPLE 2: PROGRAMMING A HEATING COMMAND ACCORDING TO TIME CONSTRAINTS Your problem The Legrand solution During the week, you get up at 07:00 every morning. You can create a heating command and programme it according to your time constraints:...
  • Page 51 go back to contents overview presentation glossary configuration control setting multimedia STEP 3: programming the command for Mondays STEP 4: repeating the time flags select the first time flag to be repeated (which starts at 06:45) select Time press repeat press the desired week press WEEK press the day to be programmed (Monday)

  • Page 52: Example 3: Automating An 'Evening' Scene Command According To Outdoor Light

    You would like: Define the In One by Legrand condition so that the to close the roller blinds in the living room and the kitchen command is actuated if you are at home.
  • Page 53 STEP 5: selecting the condition press press Automations press press select In One by Legrand and press name the automation ‘Evening’ name the condition: ‘presence’ and press select the command by pressing evening press twice on the LEARN button of the automatic switch...

  • Page 54: Example 4: Creating A 'Wake Up' Mediascene

    EXAMPLE 4: CREATING A ‘WAKE UP’ MEDIASCENE Your problem The Legrand solution During the week, you get up at 7.30 a.m. every morning. You can create a ‘Wake up’ scene command that lets you control all the desired products.
  • Page 55 go back to contents overview presentation glossary configuration control setting multimedia STEP 2: Creating a ‘Wake up’ playlist command STEP 4: Programming the command select select Playlists Time press the desired week press the press the day to be programmed (Monday) press the key to add a time flag press...

  • Page 56: Language

    go back to contents VI / Setting functions This section presents the possibilities for changing the following LANGUAGE settings: language To modify the language of the interface: date and time place the Language icon at the centre of the screen using standby keys to select it network configuration...

  • Page 57: Date And Time

    go back to contents setting presentation glossary configuration control overview multimedia 2.2 - Activating/disabling the automatic time DATE AND TIME change 2.1 - Changing the date and time The automatic time change from summer time to winter time is activated by default. To change the device’s date: place the Date/time icon at the centre of the screen using keys to select it...

  • Page 58: Standby

    go back to contents setting presentation glossary configuration control overview multimedia STANDBY NETWORK CONFIGURATION To change the device’s standby setting: To change the device’s network configuration: select the Standby icon by placing it at the centre of the select the Network icon by placing it at the centre of the screen using the keys screen using the...

  • Page 59: Updating

    go back to contents setting presentation glossary configuration control overview multimedia UPDATING My preferences > FTP update 00:00 To modify the update settings: select the Update icon by placing it at the centre of the New version available, screen using the keys proceed with update? press...

  • Page 60: Information

    go back to contents setting presentation glossary configuration control overview multimedia INFORMATION CALIBRATING THE TOUCHSCREEN To display general information about the controller: To calibrate the controller’s touchscreen, and re-establish a select the Information icon by placing it at the centre of the proper display, just select the Calibration command.

  • Page 61: Brightness

    go back to contents setting presentation glossary configuration control overview multimedia BRIGHTNESS UNITS To adjust the backlighting level of the Scenario Controller, just To reassign a unit: select the Brightness command. My preferences > adjust the brightness 00:00 My preferences > units 00:00 Units List Command...
  • Page 62 go back to contents setting presentation glossary configuration control overview multimedia By default, units are assigned as follows: My preferences > units 00:00 - 1 to 20: scenes - 21 to 35: switch Units List Command - 36 to 50: shutters Unit 1 - 51 to 65: departure Unit 2...
  • Page 63 go back to contents VII / Multimedia control This tab lets you play playlists on multimedia players on an ad SELECT A PLAYLIST hoc basis. These playlists are not recorded as commands. To access this functionality, press the Playlists icon press the Multimedia control tab monday january 1 00:00...
  • Page 64 go back to contents multimedia presentation glossary configuration control overview setting To view sub-directories, just press on the ‘right’ key of the navigation keypad (the left key lets monday january 1 00:00 you go back to the directories). Dell 722 press to confirm The following screen is displayed.

  • Page 65: Selecting A Player

    go back to contents multimedia presentation glossary configuration control overview setting SELECTING A PLAYER monday january 1 00:00 press the Players icon The screen displays the available players. Playlists Players monday january 1 00:00 Play: Living room TV normal Bedroom plasma TV Playlists Players Select the destination player...
  • Page 66 www.legrandgroup.com 128, av. du Maréchal-de-lattre de Tassigny 87045 Limoges Cedex - France Tél. 33 555 068 787 Fax : 33 555 061 341...

Table of Contents