Osd Warning Messages - Dell UltraSharp UP3218K User Manual

OSD Warning Messages

When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie),
manual brightness adjustment is disabled.
When the monitor does not support a particular resolution mode, you can see the
following message:
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See
ranges addressable by this monitor. Recommended mode is 7680 x 4320.
You can see the following message before the DDC/CI function is disabled:
40 | Operating the Monitor
Dell UltraSharp 32 Monitor
To allow manual adjustment of brightness, the Dynamic Contrast will be
switched o .
Do you want to continue?
Dell UltraSharp 32 Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to
listed timing as per the monitor specifications.
Monitor Specifications
Dell UltraSharp 32 Monitor
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes No
7680x4320, 60Hz or any other monitor
for the Horizontal and Vertical frequency
Yes No
UP3218K
UP3218K
UP3218K