Dell UltraSharp UP3218K User Manual page 22

2. Connection Guide for 8K4K 30Hz (max.) Resolution (Single DP
Cable)
1. Follow the connection guide below for
DP cables connection.
2. Turn On the monitor by pressing the
power on/off button.
DP1 DP2
C
DP – DP cable (1x)
Use one of the DP – DP
D
cables to connect DP
port on monitor to the DP
port on notebook
22 | Setting Up the Monitor
1. Notebook with DP port
C D
3. Power up/ Boot up the computer or
notebook.
4. Change resolution if necessary up to 7680
x 4320 30Hz.
• Graphics card requirement:
• Recommended list of cards:
• Graphics card requirement:
• AMD driver version:
• nVidia driver version:
Troubleshooting
1. BIOS/Post screen is not observed,
• To speed up monitor
2. Black screen :
• Ensure the graphics card support
3. Cannot achieve or image unstable
• Ensure your graphics card is
• Use only the in-box DP cables for
Single DP port that is compliant to
DP1.4 support HBR3.
nVidia GeForce series : GTX1070/1080,
Quadro series : P5000/6000.
AMD Radeon series : RX480.
Ensure the graphics card has 2 or more
DP outputs.
With two DP ports that are compliant to
DP1.4 support
HBR3, DisplayID 1.3 supporting Tile
Display feature.
revision later than 17.10 or later
http://support.amd.com/en-us/download
revision later than 381.xx or later
http://www.nvidia.com/Download/index.
aspx?lang=en-us
black screen during BIOS/Post,
long period of black screen when
monitor wake from sleep:
initialization, disable monitor
Sleep by OSD (Menu>Energy
Settings>Monitor Sleep> Disable).
DP1.4 (older DP1.1 version is not
supported by UP3218K).
at 8k4k resolution:
capable to support 8k4k.
connection to your PC.
Non-DP certified or low quality
DP cable may degrade signal
integrity/bandwidth, resulting in
reduced performance.