Dell UltraSharp UP3218K User Manual page 23

Connecting the USB 3.0 cable
After you have completed connecting the DP-DP cables, follow the procedure below to
connect the USB 3.0 cable to the computer and complete your monitor setup:
1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port
on your computer.
2. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the monitor.
3. Plug the power cables for your computer and monitor into nearby outlet.
4. Turn On the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an
image, see Troubleshooting.
CAUTION: The graphics are used for the purpose of illustration only. Appearance of
the computer may vary.
USB
Setting Up the Monitor | 23