Pre-Check; Environment; Starting The System - Samsung OfficeServ 7100 Installation Manual

CHAPTER 8.
This chapter describes items to check before starting the OfficeServ 7100 system, the procedure
for starting the system, and the procedure to test the operation of the system.

8.1 Pre-Check

This section describes items to check before starting the OfficeServ 7100 system.

8.1.1 Environment

Temperature
Check if the room temperature is between 0°C and 40
out of range from the normal operation temperature, install a heating/cooling device to
maintain the normal operation temperature.
Humidity
Check if the humidity of the room where the system is installed is between 10% and
90%. Take special caution since humidity affects the electric components and
connectors of the system.
Direct Sunlight and Dust
The room where the OfficeServ 7100 system is installed should be protected from
direct sunlight and should have ventilation systems to prevent the system from
malfunctioning due to dusts.
© SAMSUNG Electronics Co., Ltd.

Starting the System

OfficeServ 7100 Installation Manual
o
C. If the room temperature is
8-1