Clearaudio Performance DC User Manual page 9

2.8
Performance DC
If the turntable was purchased as a package together with the
follow the below described installation of the tonearm.
Position of the screw
to fasten the tonearm
with 2 mm allen key
Boring for the tonearm
feet
1. Insert carefully first the cable and then the tonearm feet through the hole of the tonearm base.
2. Now adjust the tonearm height.
3. At the end secure the tonearm with the screws with are already integrated at the front of the
mounting base.
4. For tonearm and cartridge mounting please refer to the user manual of the respective manufacturer.
Page 9
Clarify
Pic. 10: Rear view
Performance DC
Clarify
tonearm
© clearaudio electronic GmbH 2016
User manual
tonearm, please