Clearaudio Performance DC User Manual page 11

Now you can connect the
Pic. 12: Connection to the main supply
2.9 Speed fine adjustment
As the motor adjustment is already pre-set at the factory, you don't have to check the speed before using
the turntable for the first time.
If you want to check the speed of your turntable by yourself over the time, we recommend to use a
Stroboscope Testrecord.
To adjust the speed so perfectly and precisely as possible, we recommend the Clearaudio Stroboscope
Testrecord (Art. No. AC038) and the Clearaudio "Speed Light" (Art. No. AC039, both available at
www.analogshop.de).
On the backside (close to the power supply input) of your turntable there are three setting trimmers:
Pic. 13: Speed fine adjustment
Urgent:
Don't use a metal screw driver. Only use screw driver made out of synthetic or ceramic material, to avoid
circuit damage.
Now you are finally ready to play your vinyl records!
Attention:
If the turntable is not in use, disconnect the unit completely from the power supply by removing the main
plug from the socket.
We wish you a lot of pleasure with your new
Page 11
Performance DC
turntable with the main supply.
Performance DC
Performance DC
- Left trimmer = setting 78 rpm
(near power supply jack)
- Middle trimmer = setting 45 rpm
- Right trimmer = setting 33 1/3 rpm
turntable.
© clearaudio electronic GmbH 2016
User manual