9. Accessories - adjusting, handling
Armrest, flip-up, height adjustable
The flip-up armrest comes in two varieties, height ad-
justable and fixed. It is mounted onto the wheelchair's
frame and can be flipped upwards/backwards by pres-
sing the red lever (A) inwards.
Mount the armrest according to the assembly instruc-
tions supplied.
The armrest height is settable between 22 and 30 cm
with 1 cm intervals.
- Push the red lever to one side and loosen the screws
that fix the armrest bracket to the frame.
- Slide the armrest up or down to the desired height.
- Tighten the screws again.
Positioning belt
The positioning belt is in two parts, is adjustable in
length and has a snap-lock. It is mounted in the ho-
les just in front of the backrest joint, above the wheel
mounts.
Assembly instructions are supplied with the belt.
Never use the armrests to lift the wheelchair.
These armrests cannot be combined with cane
holder or with 24" 22" or 20" rear wheels in
position C.
A
The belt is to be used only for positioning in the
wheelchair. It must not be used as a substitute
for a car safety belt.
Ensure that the user does not slide forwards in
the seat as this can lead to the belt impairing
the supply of blood to the hip/waist area.
43
Etac / Cross 5 / www.etac.com
3 mm
5 mm