Booklet Finisher Sr5020 (Saddle Stitch) - Ricoh pro c901 Troubleshooting Manual

2. Adding Paper, Toner, Staples, Rings and Glue
Open the finisher
2
front cover.
Pull handle Rb18,
and then pull out
the staple unit.
Turn knob Rb19
counterclockwise
to rotate the staple unit.
Push the new refill
into the cartridge until
it clicks.

Booklet Finisher SR5020 (Saddle Stitch)

This section describes how to add staples to Booklet Finisher SR5020 (saddle stitch).
76
Pull out the cartridge
lever.
Hold the lever, and
then push in the
cartridge.
Pull out the cartridge
gently.
Push in the cartridge
until it clicks.
Return the staple unit
to its original position.
Close the finisher
front cover.
Remove the empty
refill in the direction
of the arrow.
CAL004