How To Connect For Zone B - McIntosh MX134 Owner's Manual

How to Connect for Zone B

The MX134 is a Dual Zone A/V Control Center. For Zone
B activation a McIntosh Sensor or Keypad together with a
Power Amplifier and Loudspeakers are required. To pro-
vide the best video quality for Zone B, it is important to
use high quality cables and keep the cable lengths as short
as possible. If S-Video Connections are used, make sure
that the cable's signal carrying wires are individually
shielded.
Note: If Zone B will not be connected at this time, proceed to
step 5.
1. Connect a cable from the MX134 POWER CONTROL
B Jack to the McIntosh Power Amplifier Power Con-
trol In Jack.
2. Connect a cable from the MX134 ZONE B OUTPUTS
Left and Right to the McIntosh Power Amplifier Left
and Right Inputs.
McIntosh WK 4 Keypad
Right
Loudspeaker
16
How to Connect for Zone B
3. Connect a cable from the MX134 KEYPADS ZONE B
to the McIntosh Keypad.
4. Connect a cable from the MX134 MON B S-Video
Socket to the Monitor/TV video input.
5. Connect the MX134 to a live AC Outlet.
McIntosh Power Amplifier
Monitor/TV
Left
Loudspeaker