How To Connect For Zone B - McIntosh MX120 Owner's Manual

How to Connect for Zone B

The MX120 is a Dual Zone A/V Control Center. For Zone
B activation, a Power Amplifier and Loudspeakers are re-
quired and the addition of a McIntosh Sensor or Keypad
allows for more convenient operation. To provide the best
video quality for Zone B, it is important to use high quality
cables and keep the cable lengths as short as possible. If S-
Video Connections are used, make sure the cable's signal
carrying wires are individually shielded.
Note: If Zone B will not be connected at this time, proceed to
step 5.
1. Connect a cable from the MX120 POWER CONTROL
B Jack to the McIntosh Power Amplifier Power Control
In Jack.
2. Connect a cable from the MX120 ZONE B OUTPUTS
Left and Right to the McIntosh Power Amplifier Unbal-
anced Left and Right Inputs.
To AC
Outlet
McIntosh Keypad
Right
Loudspeaker
18
McIntosh Power Amplifier
How to Connect for Zone B
3. Connect a cable from the MX120 KEYPADS ZONE B
to the McIntosh Keypad.
4. Connect a cable from the MX120 MON B S-Video
Socket to the Monitor/TV video input.
5. Connect the MX120 to a live AC Outlet.
Monitor/TV
Left
Loudspeaker