Default Settings - McIntosh MX134 Owner's Manual

MENU: MAIN SYSTEM SETUP
SPEAKER SIZE
SPEAKER TIME DELAY
SPEAKER LEVEL
INPUT SETUP
SURROUND MODE SETUP
ZONE B SETUP
ADVANCED
EXIT
Figure 6
6. If adjustments have been performed, the Adjustment
Acceptance Menu will appear on the Monitor/ TV
screen asking if you want to save the adjustments in
memory. Use the Up
buttons to select YES to save, or NO to not save, then
press the SELECT Push-button to exit the Setup Mode
and return to normal operation. Refer to figure 7.
ADJUSTMENTS HAVE BEEN MADE
DO YOU WANT TO SAVE THEM?
NO
YES
Figure 7
or Down directional push-

Default Settings

The following listings indicate the factory default settings.
Refer to the listed page number for instructions on how to
change a default setting:
Speaker Size:
Speaker Type
Front ............................ Small (THX) .................. 25
Center .......................... Small (THX) .................. 25
Surround ..................... Small (THX) .................. 25
Back Surround ............ Small2 (THX) ................ 25
1
Subwoofer .................. Yes .................................. 25
Sub Crossover .............. 80 ................................... 25
Mc Bass Mode ............ Off .................................. 25
Speaker Time Delay:
Speaker Location
Left Front .......................... 10 feet ........................ 27
Center ................................ 10 feet ........................ 27
Right Front ........................ 10 feet ........................ 27
Right Surround ................. 10 feet ........................ 27
Back Right Surround ........ 10 feet ........................ 27
Back Left Surround .......... 10 feet ........................ 27
Left Surround .................... 10 feet ........................ 27
Subwoofer ......................... 10 feet ........................ 27
Speaker Level:
Speaker Location
Left Front .......................... 0 ................................. 28
Center ................................ 0 ................................. 28
Right Front ........................ 0 ................................. 28
Right Surround ................. 0 ................................. 28
Back Right Surround ........ 0 ................................. 28
Back Left Surround .......... 0 ................................. 28
Left Surround .................... 0 ................................. 28
Subwoofer ......................... 0 ................................. 28
1
The Low Frequency Effect (LFE) Sound Information is
usually assigned to the Subwoofer Channel. If the Subwoofer
Channel is switched Off and one or more of the Front
Channel Loudspeakers are set to Large in the Speaker Size
Setup Menu, the LFE Sound Information will be redirected
to the Large Loudspeaker(s).
Speaker Setting Refer to Page
Viewing Distance Refer to Page
Initial Level Refer to Page
SETUP
23