Quality Of Service Parameters - AudioCodes Mediant 4000 SBC User Manual

User's Manual
Parameter
Static Route Table
Static Route Table
configure voip >
static
[StaticRouteTable]

51.2.4 Quality of Service Parameters

The Quality of Service (QoS) parameters are described in the table below.
Parameter
Layer-2 Class Of Service (CoS) Parameters (VLAN Tag Priority Field)
DiffServ Table
configure voip >
vlan-mapping
[DiffServToVlanPriority]
Layer-3 Class of Service (TOS/DiffServ) Parameters
Media Premium QoS
media-qos
[PremiumServiceClassMe
diaDiffServ]
Control Premium QoS
control-qos
[PremiumServiceClassCo
Version 7.0
Defines up to 30 static IP routes for the device.
The format of the ini file table parameter is as follows:
[ StaticRouteTable ]
FORMAT StaticRouteTable_Index = StaticRouteTable_DeviceName,
StaticRouteTable_Destination, StaticRouteTable_PrefixLength,
StaticRouteTable_Gateway, StaticRouteTable_Description;
[ \StaticRouteTable ]
For a description of the parameter, see ''Configuring Static IP Routes'' on
page 140.
Table 51-12: QoS Parameters
The table configures DiffServ-to-VLAN Priority mapping. For each packet
sent to the LAN, the VLAN Priority of the packet is set according to the
DiffServ value in the IP header of the packet.
The format of this ini file is as follows:
[ DiffServToVlanPriority ]
FORMAT DiffServToVlanPriority_Index =
DiffServToVlanPriority_DiffServ, DiffServToVlanPriority_VlanPriority;
[ \DiffServToVlanPriority ]
For example:
DiffServToVlanPriority 0 = 46, 6;
DiffServToVlanPriority 1 = 40, 6;
DiffServToVlanPriority 2 = 26, 4;
DiffServToVlanPriority 3 = 10, 2;
For a description of the table, see Configuring Quality of Service on page
143.
Note: For the parameter to take effect, a device reset is required.
Global parameter that defines the DiffServ value for Premium Media CoS
content. You can also configure this functionality per specific calls, using
IP Profiles (IpProfile_IPDiffServ). For a detailed description of the
parameter and for configuring this functionality in the IP Profile table, see
''Configuring IP Profiles'' on page 386.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with the
IP Profile.
Global parameter that defines the DiffServ value for Premium Control
CoS content (Call Control applications). You can also configure this
functionality per specific calls, using IP Profiles (IpProfile_SigIPDiffServ).
For a detailed description of the parameter and for configuring this
717
51. Configuration Parameters Reference
Description
Description
Mediant 4000 SBC