Configuring Snmp Trap Destinations - AudioCodes Mediant 4000 SBC User Manual

8.3

Configuring SNMP Trap Destinations

The SNMP Trap Destinations table lets you to configure up to five SNMP trap managers.
You can associate a trap destination with SNMPv2 users and specific SNMPv3 users.
Associating a trap destination with SNMPv3 users sends encrypted and authenticated
traps to the SNMPv3 destination. By default, traps are sent unencrypted using SNMPv2.

To configure SNMP trap destinations:
1. Open the SNMP Trap Destinations table (Configuration tab > System menu >
Management > SNMP > SNMP Trap Destinations).
2. Configure the SNMP trap manager parameters according to the table below.
3. Select the check box corresponding to the SNMP Manager that you wish to enable.
4. Click Submit.
Notes:
•
Only row entries whose corresponding check boxes are selected are applied when
clicking Submit; otherwise, settings revert to their defaults.
•
To enable the sending of the trap event
acPerformanceMonitoringThresholdCrossing, which is sent every time a threshold
(high or low) of a performance monitored SNMP object is crossed, configure the
ini file parameter PM_EnableThresholdAlarms to 1.
Table 8-2: SNMP Trap Destinations Table Parameters Description
Parameter
SNMP Manager
[SNMPManagerIsUsed_x]
IP Address
[SNMPManagerTableIP_x]
Trap Port
[SNMPManagerTrapPort_x
]
Trap User
User's Manual
Figure 8-2: SNMP Trap Destinations Table
Enables the SNMP Manager to receive traps and checks the validity of
the configured destination (IP address and port number).

[0] (check box cleared) = (Default) Disables SNMP Manager

[1] (check box selected) = Enables SNMP Manager
Defines the IP address (in dotted-decimal notation, e.g., 108.10.1.255)
of the remote host used as the SNMP Manager. The device sends
SNMP traps to this IP address.
Defines the port number of the remote SNMP Manager. The device
sends SNMP traps to this port.
The valid value range is 100 to 4000. The default is 162.
Associates a trap user with the trap destination. This determines the
90
Description
Document #: LTRT-41730
Mediant 4000 SBC