Bosch Greenstar combi 100 p Installation And Service Instructions For Contractors page 61

 DHW tank/type/Number/heating surface output:
 System hydraulics checked, notes:
Modified service functions:
Select the modified service functions and enter the values here.
Heating control:
 Weather-compensated control
 Remote control × ...... Qty, heating zone(s) coding:
 Room temperature-dependent control × ...... Qty, heating zone(s) coding:
 Module × ...... Qty, heating zone(s) coding:
Other:
 Heating controls set, notes:
 Modified heating control settings documented in the controller operating/installation instructions
The following work has been carried out:
 Electrical connections checked, notes:
 Condensate trap filled
 Function check carried out
Commissioning includes checking the settings, a visual heating leak test and a functional check of the boiler and control. The system installer conducts
a test of the heating system.
The system named above has been checked to the extent described.
___________________________________________________________
Name of service engineer
____________________________________________________________
Date, system installer's signature
Table 38 Commissioning log
Greenstar combi 100 p / 151 p
Commissioning log for the appliance | 61
 Room temperature-dependent control
 Combustion air/flue gas test carried out
 Leak test carried out on the gas and water sides
The documents have been handed over to the home owner/operator. The
home owner/operator has been instructed regarding safety and operation
of the boiler and accessories, including the need for regular scheduled
maintenance. Attention has been drawn to the requirement for regular
maintenance of the above-mentioned heating system.
__________________________________________________________
Date, user's signature
Affix the test report here.
6720872361 (2017/04)