Bosch Greenstar combi 100 p Installation And Service Instructions For Contractors page 26

26 | Notes on installation and operation
NOTICE:
Risk of damage to 2 inch PVC pipe
▶ For Greenstar combi 151 p, use 2 inch CPVC pipe or 3 inch pipe.
Material Item
PVC schedule 40, 80 2" (50 mm) Vent or air pipe and fitting
PVC-DWV
CPVC schedule 40, 80
PVC schedule 40, 80 3" (76 mm) Vent or air pipe and fitting
PVC-DWV
CPVC schedule 40, 80
PP 3" (80 mm) vent or air pipe M&G Duravent
PolyPro and Centrotherm InnoFlue
PP 2" (50 mm) vent or air pipe M&G Duravent
PolyPro and Centrotherm InnoFlue
PP 3"/5" (80/125 mm) concentric
(manufactured by M&G Duravent)
PP-Flex 3" (80 mm) Vent and combustion air pipe
PP-Flex 2" (50 mm) vent or air pipe M&G Duravent
PolyPro and Centrotherm InnoFlue
PVC Pipe cement/primer
CPVC
a. Components of the certified vent systems must not be interchanged with other vent systems or unlisted pipe fittings. Plastic components, and specified primers and glues
of the certified vent system must be from a single system manufacturer and not intermixed with other system manufacturer's vent system parts.
Table 11 Materials for pipe
For installations in Canada, field supplied plastic vent piping must
comply with CAN/CGA B149.1 (latest edition) and be certified to the
Standard for Type BH Gas Venting systems. ULC S636 components of
the listed system may not be combined with other venting systems or
pipes/fittings that are not listed here. All plastic components and
Terminal end, vertical Material
Ø 3" / Ø 5" (Ø 76/125 mm) concentric PVC
Ø 3" / Ø 5" (Ø 76/125 mm) concentric CPVC
Ø 3" / Ø 5" (Ø 80/125 mm) concentric PP
Ø 3" (80 mm) PolyPro Support ElbowBase Suport
+ SW to Flex Coupler
Ø 2" (Ø 50 mm) PolyPro Support ElbowBase Suport
+ SW to Flex Coupler
Table 12 Roof terminals
Wall termination
Ø 3" (Ø 76 mm)
90 °-elbow with
inlet screen
Ø 3" (Ø 76 mm) twin pipe termination
Ø 3" (Ø 76 mm) single pipe termination
Ø 3" / Ø 5" (Ø 80/125 mm) Bosch Greenstar
Horizontal Telescopic Terminal Kit
Table 13 Wall terminals
6720872361 (2017/04)
All PP/PVC/CPVC combustion air and vent pipe materials and fittings
(except for steel components) must satisfy the following requirements
and be UL-approved:
United states
ANSI/ASTM D1785
ANSI/ASTM D2665
ANSI/ASTM F441
ANSI/ASTM D1785
ANSI/ASTM D2665
ANSI/ASTM F441
ANSI Cat IV
Approved Polypropylene
ANSI Cat IV
Approved Polypropylene
ANSI Cat IV
Approved Polypropylene
ANSI Cat IV
Approved Polypropylene
ANSI Cat IV
Approved Polypropylene
ANSI/ASTM D2564
ANSI/ASTM F493
specified primers and glues of certified vent systems must be from a
single manufacturer and not intermingled with other system
manufacturer's vent system parts.The supplied vent connector and
separate available vent termination are certified as a part of the
Greenstar Boiler.
Supplier
IPEX System 636
IPEX System 636
M&G Duravent PolyProCentrotherm InnoFlue
M&G Duravent PolyProCentrotherm InnoFlue
M&G Duravent PolyProCentrotherm InnoFlue
Flue System / Materials
parallel stainless steel
PVC (elbow)
stainless steel (screen)
PP
PP
PP
Canada
BH Gas venting systems,
a
ULC S636 ,
Class IIA - PVC,
Class IIB - CPVC,
Class IIC - polypropylene
Supplier Order number
Flex-L 46546901
IPEX (elbow) ULC S636 approval (elbow) L2594
Langly Wire (screen) (screen)
M&G Duravent PolyPro 3PPS-HTP
M&G Duravent PolyPro 3PPS-HST
Bosch 7738003218
Greenstar combi 100 p / 151 p
X
X
X X
X X
X X
X X
X X
X X
X X
X X
X
X X
X X
Order number
196006
197009
3PPS-VK
3PPS-FCT
2PPS-FCT