Table of Contents
Advertisement
Chapter 13
Transmit Power:
Select Low, Middle, or High to specify the data transmit power. The
default and recommended setting is High.
¾ To change the security option:
1. Go to
Advanced
2. Select an option from the
None, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP. WPA2
uses the newest standard and the security level is the highest. We recommend you
don't change the default settings unless necessary.
13. 3. 2. Use WPS for Wireless Connection
You can use WPS (Wi-Fi Protected Setup) to add a new wireless device to your existing
network quickly and easily.
Method 1: Use the WPS button
Use this method if your client device has a WPS button.
1. Press the WPS button the modem router for 1 second.
2. Press the WPS button of the client device directly.
3. The WPS LED flashes for about 2 minutes during the WPS process.
4. When the WPS LED is on, the client device has successfully connected to the
modem router.
Method 2: Use the WPS button on the web management page
Use this method if your client device has a WPS button.
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to
Advanced
3. Click
Start WPS
4. Press the WPS button of the client device directly.
5. The LED of the router flashes quickly.
>
Wireless
>
Wireless Settings
Security
drop-down list. The router provides four options,
>
Wireless
>
WPS
page.
on the page.
Specify Your Network Settings
page.
60
Advertisement
Table of Contents
