Password Control Commands; Display Password-Control - HPE FlexFabric 7900 Series Security Command Reference

Password control commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.

display password-control

Use display password-control to display password control configuration.
Syntax
display password-control [ super ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
super: Displays the password control information for the super passwords. If you do not specify this
keyword, the command displays the global password control configuration.
Examples
# Display the global password control configuration.
<Sysname> display password-control
Global password control configurations:
Password control:
Password aging:
Password length:
Password composition:
Password history:
Early notice on password expiration:
Maximum login attempts:
Action for exceeding login attempts:
Minimum interval between two updates: 24 hours
User account idle time:
Logins with aged password:
Password complexity:
# Display the password control configuration for super passwords.
<Sysname> display password-control super
Super password control configurations:
Password aging:
Password length:
Password composition:
Disabled
Enabled (90 days)
Enabled (10 characters)
Enabled (1 types, 1 characters per type)
Enabled (max history records:4)
7 days
3
Lock user for 1 minutes
90 days
3 times in 30 days
Disabled (username checking)
Disabled (repeated characters checking)
Enabled (90 days)
Enabled (10 characters)
Enabled (1 types, 1 characters per type)
75