Ip Verify Source - HPE FlexFabric 7900 Series Security Command Reference

Syntax
ip source binding ip-address ip-address mac-address mac-address
undo ip source binding { all | ip-address ip-address mac-address mac-address }
Default
No global static IPv4SG binding exists.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address ip-address: Specifies the IPv4 address for the static binding. The IPv4 address cannot
be 127.x.x.x, 0.0.0.0, or a multicast IP address.
mac-address mac-address: Specifies the MAC address for the static binding. The MAC address
must be in H-H-H format, and cannot be all 0s, all Fs (a broadcast address), or a multicast address.
all: Removes all global static IPv4SG bindings.
Usage guidelines
A global static IPv4SG binding takes effect on all interfaces.
Examples
# Configure a global static IPv4SG binding.
<Sysname> system-view
[Sysname] ip source binding ip-address 192.168.0.1 mac-address 0001-0001-0001
Related commands
•
display ip source binding static
•
ip source binding (interface view)

ip verify source

Use ip verify source to enable both static and dynamic IPv4SG on an interface.
Use undo ip verify source to restore the default.
Syntax
ip verify source { ip-address | ip-address mac-address | mac-address }
undo ip verify source
Default
The IPv4SG feature is disabled on an interface.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, VLAN interface view
Predefined user roles
network-admin
mdc-admin
276