Fips Commands; Display Fips Status; Fips Mode Enable - HPE FlexFabric 7900 Series Security Command Reference

FIPS commands

display fips status

Use display fips status to display the current FIPS mode state.
Syntax
display fips status
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display the current FIPS mode state.
<Sysname> display fips status
FIPS mode is enabled.
Related commands

fips mode enable

fips mode enable
Use fips mode enable to enable FIPS mode.
Use undo fips mode enable to disable FIPS mode.
Syntax
fips mode enable
undo fips mode enable
Default
The FIPS mode is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After you enable FIPS mode and reboot the device, the device operates in FIPS mode. The FIPS
device has strict security requirements, and performs self-tests on cryptography modules to verify
that they are operating correctly.
300