ARP attack protection commands
Unresolvable IP attack protection commands
arp resolving-route enable
Use arp resolving-route enable to enable ARP blackhole routing.
Use undo arp resolving-route enable to disable ARP blackhole routing.
Syntax
arp resolving-route enable
undo arp resolving-route enable
Default
ARP blackhole routing is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Configure this command on the gateways.
Examples
# Enable ARP blackhole routing.
<Sysname> system-view
[Sysname] arp resolving-route enable
arp resolving-route probe-count
Use arp resolving-route probe-count to set the number of ARP blackhole route probes.
Use undo arp resolving-route probe-count to remove the configuration.
Syntax
arp resolving-route probe-count count
undo arp resolving-route probe-count
Default
The device probes ARP blackhole routes for only one time.
Views
System view
Predefined user roles
network-admin
Parameters
count: Sets the number of probes, in the range of 1 to 25.
278