Vpn-Instance (Radius Scheme View); Hwtacacs Commands; Data-Flow-Format (Hwtacacs Scheme View) - HPE FlexFabric 7900 Series Security Command Reference

Examples
# Configure the device to remove the domain name from the username sent to the RADIUS servers
specified in RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] user-name-format without-domain
Related commands
display radius scheme

vpn-instance (RADIUS scheme view)

Use vpn-instance to specify a VPN for a RADIUS scheme.
Use undo vpn-instance to remove the configuration.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Default
The RADIUS scheme belongs to the public network.
Views
RADIUS scheme view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-instance-name: Specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to 31
characters.
Usage guidelines
The VPN specified by using this command applies to all servers in the RADIUS scheme for which no
VPN is specified.
Examples
# Specify VPN test for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] vpn-instance test
Related commands
display radius scheme

HWTACACS commands

data-flow-format (HWTACACS scheme view)

Use data-flow-format to set the data flow and packet measurement units for traffic statistics.
53