State Primary - HPE FlexFabric 7900 Series Security Command Reference

Default
All types of notifications for RADIUS are enabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
accounting-server-down: Sends a notification when the RADIUS accounting server becomes
unreachable.
accounting-server-up: Sends a notification when the RADIUS accounting server becomes
reachable.
authentication-error-threshold: Sends a notification when the number of authentication failures
exceeds the specified threshold. The threshold is represented by the ratio of the authentication
failures to the total number of authentication attempts. The value range is 1 to 100 and the default
value is 30. This threshold can only be configured through the MIB.
authentication-server-down: Sends a notification when the RADIUS authentication server
becomes unreachable.
authentication-server-up: Sends a notification when the RADIUS authentication server becomes
reachable.
Usage guidelines
If you do not specify any keywords, this command enables or disables all types of notifications for
RADIUS.
When SNMP notifications for RADIUS are enabled, the SNMP agent supports the following
notifications generated by RADIUS:
•
RADIUS server unreachable notification—The RADIUS server cannot be reached. RADIUS
generates this notification if it cannot receive any response to an accounting or authentication
request within the specified RADIUS request transmission attempts.
•
RADIUS server reachable notification—The RADIUS server can be reached. RADIUS
generates this notification for a previously blocked RADIUS server after the quiet timer expires.
•
Excessive authentication failures notification—The number of authentication failures to the
total number of authentication attempts exceeds the specified threshold.
Examples
# Enable the SNMP agent to send RADIUS accounting server unreachable notifications.
<Sysname> system-view
[Sysname] snmp-agent trap enable radius accounting-server-down

state primary

Use state primary to set the status of a primary RADIUS server.
Syntax
state primary { accounting | authentication } { active | block }
Default
The primary RADIUS server specified for a RADIUS scheme is in active state.
47