Dda Data Logger - Ducati Monster 795 Owner's Manual

DDA data logger

This function allows activating the DDA (Ducati Data
Analyser): data logger must be connected to vehicle
wiring.
To enable this function, enter the menu and set "DDA"
data logger to "On" by holding button (1, Fig. 9)
pressed in position B "
STOP control for the data logger lap separator is the
high-beam flash button FLASH (12, Fig. 4) on the LH
switch. If the DDA function is active and the display
is suddenly switched off (Key-Off), the function is
switched off automatically.
Note
Online assistance is available to Ducati Data
Analyser (DDA) owners (http://dda.prosa.com). This
service will provide anything necessary to correctly
use the DDA with your PC: both for the device and
the software for analysing the recorded data.
46
" for 3 seconds. The START/
Press B for 3s
Warning
After use, disconnect the DDA from the main
wiring harness.
MENU
Press B for 3s
Fig. 26