Power ON
Running status
Parameter setting
Monitor
Auxiliary function
Display mode:
Monitor mode: U- XX: XX is monitor parameter code
Auxiliary function mode: FX-XX: the first X is group code; the second X is parameter
code in this group.
Parameter settings mode PX-XX: the first X is group code; the second X is parameter
code in this group.
Alarm mode E-XXX:XXX is alarm code.
2. Running status
The LED digits and code will show the status of servo drive.
Use the status display
The servo enters status display when power on. If it cannot enter this status, press
STATUS/ESC button.
24