About This Manual; Symbols Used In The Manual; Abbreviations; Homologations - REMEHA P 420 Installation And Service Manual

2 About this manual

2.1 Symbols used in the manual

Caution danger
Risk of injury and damage to equipment. Attention must be
paid to the warnings on safety of persons and equipment.
Specific information
Information must be kept in mind to maintain comfort.

2.2 Abbreviations

DHW: Domestic hot water.
PPS: Polypropylene hardly inflammable.
3CE: Collective conduit for sealed boiler

2.3 Homologations

This product will be marketed in the following European Union
member states:
NL - BE - ES - GB - HU - SE
with a gas or oil-burner of the associated category.
2.3.1 Directive 97/23/EC
Gas and oil boilers with a maximum operating temperature of 110°C
and hot water tanks with a maximum operating pressure of 10 bar
pertain to article 3.3 of the directive, and therefore, cannot be CE-
marked to certify compliance with the directive 97/23 EC.
The boilers and hot water tanks are designed and manufactured in
accordance with the sound engineering practice, as requested in
article 3.3 of the directive 97/23/EC, it is certified by compliance with
the directives 90/396/EC, 92/42/EC, 2006/95/EC and 2004/108/EC.
6
Reference
Refer to another manual or other pages in this instruction
manual.
Hi: Lower heating value LHV (Nett)
Hs: Higher heating value HHV (Gross)
P 420 16/03/2016 - 300016839-03