ZyXEL Communications VES-1012 Hardware Installation Manual page 40

VES-1012 Hardware Installation Guide
Gently pull out the casing that holds the two fuses as shown next.
Step 4.
Pull gently, but firmly, to remove the burnt out fuse(s) from the fuse housing. A burnt-out fuse is
Step 5.
blackened, darkened or cloudy inside its glass casing. A working fuse has a completely clear glass
casing. Dispose of the burnt-out fuse(s).
Installing Fuses
Push the replacement fuse(s) into the fuse housing until you hear a click.
Step 1.
Firmly, but gently, push the fuse housing back into the VES-1012 housing until you hear a click.
Step 2.
Plug the power cord back into the unit.
Step 3.
B
Diagram 2 Opening the Fuse Housing
Diagram 3 Fuses in the Fuse Housing
Appendix A Removing and Installing a Fuse