Configuring Accounting Methods For An Isp Domain - HP FlexFabric 5930 Series Security Configuration Manual

Step
5. Specify the authorization
method for login users.

Configuring accounting methods for an ISP domain

Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1. Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2. Determine whether to configure the default accounting method for all access types or service types.
The default accounting method applies to all access users, but has a lower priority than the specific
accounting method configured for an access type or service type.
Configuration guidelines
When configuring accounting methods, follow these guidelines:
Login users who use FTP services do not support accounting.
•
Local accounting does not provide statistics for charging. It only counts and controls the number of
•
concurrent users who use the same local user account. The threshold is configured by using the
access-limit command.
Configuration procedure
To configure accounting methods for an ISP domain:
Step
Enter system view.
1.
2. Enter ISP domain view.
3. Specify the default
accounting method for all
types of users.
4. Specify the command
accounting method.
5. Specify the accounting
method for login users.
Command
authorization login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
Command
system-view
domain isp-name
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
accounting command hwtacacs-scheme
hwtacacs-scheme-name
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
38
Remarks
By default, the default
authorization method is used
for login users.
Remarks
N/A
N/A
By default, the accounting
method is local.
By default, the default
accounting method is used
for command accounting.
By default, the default
accounting method is used
for login users.