Failed To Obtain The Ca Certificate; Failed To Obtain Local Certificates - HP FlexFabric 5930 Series Security Configuration Manual

Failed to obtain the CA certificate

Symptom
The CA certificate cannot be obtained.
Analysis
The network connection is down because, for example, the network cable is damaged or the
•
connectors have bad contact.
No trusted CA is specified.
•
The URL of the registration server is not correct or not specified.
•
The system time of the device is not synchronized with the CA server.
•
• The source IP address of the PKI protocol packets is not specified or not correct.
The fingerprint information is illegal.
•
Solution
1. Make sure the network connection is physically proper.
2. Verify that the required configurations are correct.
3. Use ping to verify that the registration server is reachable.
4. Synchronize the system time of the device with the CA server.
5. Specify the correct source IP address for PKI protocol packets that the CA server can accept.
6. Verify the fingerprint information on the CA server.

Failed to obtain local certificates

Symptom
No local certificates can be obtained.
Analysis
The network connection is down.
•
No CA certificate has been obtained before you try to obtain local certificates.
•
• The LDAP server is not configured or is incorrectly configured.
No key pair is specified for the PKI domain for certificate request, or the specified key pair does not
•
match the local certificates to the obtained.
The PKI domain does not reference the PKI entity configuration, or the PKI entity configuration is
•
incorrect.
CRL checking is enabled, but CRLs do not exist locally or CRLs cannot be obtained.
•
The PKI domain is not specified with the source IP address of the PKI protocol packets that the CA
•
server can accept, or it is specified with an incorrect one.
• The system time of the device is not synchronized with the CA server.
Solution
1. Make sure the network connection is physically proper.
2. Obtain or import the CA certificate.
98